POLINI THOR 200 HF
The new Polini Thor 200 HF has been developed by the Polini R&D team using the new 3D modeling software systems and flow dynamic simulation. The result of this research and the introduction of the innovative HF System grant better cooling improving the performance of the Thor 200 HF. It has been used during the last 2018 French Championship and it has already won its first title with the pluri-world champion Alex Mateos, confirming the reliability of the new THOR 200 HF.
The new design of the “HIGH FLOW” cooling shrouds combines the now existing air forced system with fan, the extraction generated through the propeller and the specific design of the cooling shroud.
This system, together with the SPARK COOLER lets the lowering of the engine working temperatures.
SPARK COOLING SYSTEM
SCS is the innovative cooling system of the spark plug that lows the working temperatures in the point of highest warm and in the burning chamber, eliminating the events of over-heating. Polini SCS system reduces the EGT temperatures till 100 C° and till 60 C° the ones under the spark plug.
The new profile of the burning chamber improves the propagation of the flame optimizing the fuel combustion phase. This peculiarity, together with the increasing of the compression ratio, improves the engine performance reducing the fuel consumption.
CARBURETOR AND AIR BOX
The new carburetor set up has been improved thanks to a series of workings inside the carburetor finalized to increase the power output and the vaporization of the petrol/air mixture. Two fuel systems are available: bowl Ø28 carburetor or Walbro WB37 carburetor.
The centrifugal clutch has been studied to grant the best safety features during all the stages: starting, take off, flight and landing.
It is equipped with a balancing countershaft which cancels any vibration granting more comfort.
Polini Thor 200 HF engine is provided with the new Polini “Flash Starter”, easy and fast to start. A version with electric starter is also available.
SPECIFIC POWER UNIT
Light alloy casting cylinder with liner with nickel-chrome plating for the best piston sliding. The piston is made of gravity die-cast light alloy at high silicon content with 2 special chromed and nitride steel rings. The design of the piston top optimizes the compression ratio.
The design of the crankshaft has the aim to increase the primary compression ratio and grants a better mixture flow.
The exhaust system is completely hand made for a better product quality. It is divided into two sections with manifold with spherical connection and fixed on natural rubber suspensions that grant longer life. The exclusive new springs with steel hooks make them stronger and offer the possibility to be better fastened. The exhaust system has a compact design and contained dimensions to reduce the weight. The small overall dimensions improve the aerodynamic and grant a low noise level
The frame-engine connecting points of the Polini Thor 200 HF are the same as the other engines: 80, 130, 190 HF and 250. This characteristic makes the engine interchangeable on all the dedicated frames.
Polini Thor 200 HF engine features many other technical solutions and safety characteristics.
System with closed circuit for the fuel collection during its transportation (only for models equipped with bowl carburetor). Prearrangement for 12V exit for future electric devices.
Very low propeller overturning torque granted by the counterturning masses.
It has been developed and produced following all the criteria for the handcraft products with the most modern and advanced production methods and under the supervision of highly specialized technicians who have achieved great experience, skill and creativity during the years.
|Polini Engine||2 stroke monocylinder|
|Bore for stroke||64 x 60|
|Cylinder||Aluminum with Gilnisil coating|
|Piston||Two chromium plated rings mm 1|
|Intake||Reed vale in the crankcase|
|Carburetor||Walbro / Polini Float Ø28|
|Air filter||Air box|
|Ignition||Electronic with battery charger possible|
|Battery charger prearrangement||Output power 80 W at 5500 RPM|
|Spark plug hood||5k Ω resistance|
|Fuel type||Lead free petrol with 2% synthetic oil|
|Gear reduction unit||Helical teeth in oil bath with 2,8 reduction ratio|
|Starting||Pull start with self winding cable Flash Starter – Electric starter (optional)|
|Clutch||Centrifugal in oil bath|
|Muffler||Expansion with oval silencer|
|Engine weight||17,5 Kg (18,5 with electric starter)|
100% Made in Italy
- 928.000.080 –Ø28 carburetor – Manual FLASH STARTER – Public price Euro 2.570,00+VAT
- 928.000.081 – Ø28 carburetor – ELECTRIC starter + manual FLASH STARTER – Public price Euro 2.870,00+VAT
- 928.000.082 –Walbro WB37 carburetor – Manual FLASH STARTER – Public price Euro 2.540,00+VAT
- 928.000.083 –Walbro WB37 – carburetor – ELECTRIC starter + manual FLASH STARTER – Public price Euro 2.860,00+VAT